Drawing information
Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)
Connector specifications
- Voltage rating: 600 V DC/AC rms
- 2 contacts current rating: 10 A per contact (max 20 A per connector)
- 3, 4 and 5 contacts current rating: 10 A per contact (max 30 A per connector)
- Insulation resistance: > 200 MΩ
- Contact resistance: < 0.01 Ω
- Wet matings: > 500
- Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
- Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
- Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
- Qualified pressure tested: 1,400 bar, 20,300 psi (mated), 800 bar, 11,600 psi (open face)
- Depth rating PEEK: 300 bar, 4,350 psi
Material specifications
- Connector body: Chloroprene rubber
- Bulkhead body: Brass, stainless steel, titanium, anodised aluminium or PEEK
- Contacts: Gold plated brass UNS - C36000
- Location pin: Stainless steel AISI 303
- O-rings: Nitrile
- Locking sleeves: POM or stainless steel
- Snap rings: Stainless steel AISI 302
- 2, 3 and 4 conductor inline cable (2 ft, 60 cm or 16 ft, 5 m): 16 AWG, 1.31 mm2 synthetic rubber
- 5 conductor inline cable (2 ft, 60 cm or 16 ft, 5 m): 18 AWG, 0.82 mm2 synthetic rubber
- Bulkhead and PBOF leads (1 ft, 30 cm): 18 AWG, 0.82 mm2 coloured PTFE
- OM leads (3", 7 cm): 18 AWG, 0.82 mm2 coloured PTFE
