Drawing information
Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)
Connector specifications
Voltage rating: 600 V DC/AC rms
Current rating: 10 A per contact (max 50 A per connector)
Insulation resistance: > 200 MΩ
Contact resistance: < 0.01 Ω
Wet matings: > 500
Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
Qualified pressure tested: 1,400 bar, 20,300 psi (mated), 800 bar, 11,600 psi (open face)
Material specifications
Connector body: Chloroprene rubber
Contacts: Brass UNS - C36000
Location pin: AISI 303
Locking sleeves: POM or stainless steel
Snap rings: AISI 302
6 and 8 conductor inline cable (2 ft, 60 cm): 16 AWG, 1.31 mm2 synthetic rubber
10 conductor inline cable (2 ft, 60 cm): 18 AWG, 0.82 mm2 synthetic rubber
Inline cable colour code
1: Black
2: White
3: Red
4: Green
5: Orange
6: Blue
7: White/black
8: Red/black
9: Green/black
10: Orange/black
Additional information
* Locking sleeve has to be modified to 30.5/21 to fit this RA connector
** When used with SubConn® Metal Shell 2400 locking sleeve has to be modified to 23.6/30.5 to fit this RA connector
