Drawing information
Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)
Connector specifications
Voltage rating on electric contacts: 300 V DC/AC rms
Current rating on electric contacts: 5 A per contact (max 20 A per connector)
Voltage rating on coax insert only: 600 V, max nominal voltage
Frequency*: 0.9 GHz / 1.2 GHz / 1.5 GHz / 1.8 GHz / 2.1 GHz / 2.4 GHz / 2.7 GHz / 3.0 GHz
Attenuation*: 6.3 dB / 7.4 dB / 8.6 dB / 9.9 dB / 11.3 dB / 12.8 dB / 14.5 dB / 15.7 dB
Recommended max frequency: 3.0 GHz
Insulation resistance: > 200 MΩ
Contact resistance: < 0.01 Ω
Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
Qualified pressure tested: 600 bar, 8,700 psi (mated)
Material specifications
Connector body: Chloroprene rubber
Bulkhead body: Brass, stainless steel, titanium or anodised aluminium
Bulkhead body (RA): Brass, stainless steel, titanium or anodised aluminium
Power contacts: Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper
Coax contacts: Gold plated contacts
O-rings: Nitrile
Locking sleeves: POM or stainless steel
Locking sleeves (RA): RADLSA-M (black POM)
Snap rings: Stainless steel AISI 302
Inline cable (2 ft, 60 cm): Mini-RG59 coax and 6 x 20 AWG, 0.52 mm2 conductors
Coax and 6-contact bulkhead leads (3.3 ft, 100 cm): RG179 coax and 6 x 20 AWG, 0.52 mm2 coloured PTFE
Inline cable colour code
1: Black
2: White
3: Red
4: Green
5: Orange
6: Blue
Additional information
* All frequency and attenuation values are based on a 10 meter cable assembly test including 2 bulkhead connectors (75 Ω).
BNC connector for RG179 coax leads use Amphenol 112133 or equivalent.
BNC connector for Mini-RG59 coax cable use Belden 1855ABHD3 or equivalent.
Recommended SMB termination for Coax, check in Technical Information chapter.
SubConn® Coax connectors are designed for dry mating only. The Coax series is not suitable for open-face pressure or waterblock applications. Locking sleeves are required. Avoid greasing the actual coax part.
