Drawing information
Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)
Connector specifications
Voltage rating: 250 V DC/AC rms
Data rate: 1 Gbit/s (up to 75 m)
Insulation resistance: > 200 MΩ
Contact resistance: < 0.01 Ω
Wet matings: > 500
Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
Qualified pressure tested: 600 bar, 8,700 psi (open face)
Depth rating PEEK: 300 bar, 4,350 psi
Material specifications
Connector body: Chloroprene rubber
Bulkhead body: Brass, stainless steel, titanium, anodised aluminium or PEEK
Bulkhead body (RA): Brass, stainless steel, titanium or anodised aluminium
Contacts: Female sockets in gold plated brass UNS - C36000, Male contacts in gold plated beryllium copper
O-rings: Nitrile
Locking sleeves: POM or stainless steel
Locking sleeves (RA): RADLSA-M (black POM)
Snap rings: Stainless steel AISI 302
Inline cable (3.3 ft, 100 cm): 4 pair 24 AWG, 0.20 mm2 PUR
Bulkhead and PBOF leads (3.3 ft, 100 cm): CAT 5E patch cable incl., RJ 45 connector incl. on bulkhead (not installed)
OM leads (3") , 7 cm: CAT 5E patch cable
Inline cable colour code
1-2: Brown, Brown/white*
3-4: Blue, Blue/white*
5-6: Orange, Orange/white*
7-8: Green, Green/white*
* Twisted pairs
Additional information
Standard RJ45 cannot be mounted on inline cable and will require a RJ45 Phoenix connector or equivalent.
