Drawing information
Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)
Connector specifications
2, 3 and 4 contacts voltage rating: 600 V DC/AC rms
2, 3 and 4 contacts current rating: 10 A per contact (max 30 A per connector)
Insulation resistance: > 200 MΩ
Contact resistance: < 0.01 Ω
Wet matings: > 500
Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
Qualified pressure tested: 1,400 bar, 20,300 psi (mated), 800 bar, 11,600 psi (open face)
Material specifications
Connector body: Chloroprene rubber
Connector housing: Stainless steel AISI 316 (other materials on request)
2, 3 and 4 contacts: Brass UNS - C36000, Male contacts in gold plated beryllium copper
Location pin: Stainless steel AISI 303
O-rings: Nitrile
Locking sleeves: POM or stainless steel
Snap rings: Stainless steel AISI 302
2, 3 and 4 contact bulkhead leads (1 ft, 30 cm): 18 AWG, 0.82 mm2 white tagged PTFE
