Drawing information
Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)
Connector specifications
Voltage rating: 300 V DC/AC rms
Current rating: 5 A per contact (max 20 A per connector)
Insulation resistance: > 200 Mohm
Contact resistance: < 0.01 ohm
Wet matings: > 500 (open face rated)
Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
Qualified pressure tested: 800 bar, 11,600 psi
Depth rating PEEK: 300 bar, 4,350 psi
Material specifications
Connector body: Chloroprene rubber
Bulkhead body: Brass, stainless steel, titanium, anodised aluminium or PEEK
Contacts: Female sockets in gold plated brass UNS - C36000, Male pins in gold plated beryllium copper
O-rings: Nitrile
Locking strap: Chloroprene rubber
Inline cable (2 ft, 60 cm): 20 AWG, 0.52 mm2 synthetic rubber
Bulkhead leads (1 ft, 30 cm): 20 AWG, 0.52 mm2 coloured PTFE
OM leads (3", 7 cm): 20 AWG, 0.52 mm2 coloured PTFE
Inline cable colour code
1: Black
2: White
3: Red
4: Green
5: Orange
6: Blue
7: White/black
8: Red/black*
9: Green/black
10: Orange/black**
* Micro 7 contacts connector uses an 8 conductor cable (only 7 conductors are used)
** Micro 9 contacts connector uses a 10 conductor cable (only 9 conductors are used)
