Drawing information
Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)
Connector specifications
Voltage rating: 300 V DC/AC rms
2, 3 and 4 contacts current rating: 10 A per contact (max 20 A per connector)
Insulation resistance: > 200 MΩ
Contact resistance: < 0.01 Ω
Wet matings: > 500
Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
Qualified pressure tested: 1,400 bar, 20,300 psi (mated), 800 bar, 11,600 psi (open face)
Depth rating: PEEK 300 bar, 4,350 psi
Material specifications
Connector body: Chloroprene rubber
Bulkhead body: Brass, stainless steel, titanium, anodised aluminium or PEEK
2, 3 and 4 contacts: Gold plated brass UNS - C36000
Location pin: Stainless steel AISI 303
O-rings: Nitrile
Locking sleeves: ABS or stainless steel
Snap rings: Stainless steel AISI 302
2, 3 and 4 conductor inline cable (2 ft, 60 cm or 16 ft, 5 m): 18 AWG, 0.82 mm2 synthetic rubber
2, 3 and 4 contact bulkhead and PBOF leads (1 ft, 30 cm): 20 AWG, 0.52 mm2 coloured PTFE
OM leads (3", 7 cm): 20 AWG, 0.52 mm2 coloured PTFE
Inline cable colour code
1: Black
2: White
3: Red
4: Green
* 3 conductor cable colour code: 1 black, 2 white, 3 green
