Drawing information
Dimensions in mm (1 mm = 0.03937 inch)Threads in inches (1 inch = 25.4 mm)
Connector specifications
- Voltage rating: 300 V DC/AC rms
- Current rating: 5 A per contact (max 30 A per connector)
- Insulation resistance: > 200 MΩ
- Contact resistance: < 0,01 Ω
- Wet matings: > 500
- Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
- Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
- Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
- Qualified pressure tested: 1,400 bar, 20,300 psi (mated), 800 bar, 11,600 psi (open face)
- Depth rating PEEK: 300 bar, 4,350 psi
Material specifications
- Connector body: Chloroprene rubber
- Bulkhead body: Brass, stainless steel, titanium, anodised aluminium or PEEK
- Bulkhead body (RA): Brass, stainless steel, titanium or anodised aluminium
- Contacts: Female sockets in gold plated brass UNS - C36000,
- Male contacts in gold plated beryllium copper
- O-rings: Nitrile
- Locking sleeves: POM or stainless steel
- Locking sleeves (RA): RADLSA-M (black POM)
- Snap rings: Stainless steel AISI 302
- Inline cable (2 ft, 60 cm): 20 AWG, 0.52 mm2 synthetic rubber
- Bulkhead and PBOF leads (1 ft, 30 cm): 20 AWG, 0.52 mm2 coloured PTFE
- OM leads (3", 7 cm): 20 AWG, 0.52 mm2 coloured PTFE
Inline cable colour code
1: Black
2: White
3: Red
4: Green
5: Orange
6: Blue
7: White/black
8: Red/black
9: Green/black
10: Orange/black
11: Blue/black
12: Black/white
13: Red/white
14: Green/white
15: Blue/white
16: Black/red
