Drawing information
Dimensions in mm (1 mm = 0.03937 inch)Threads in inches (1 inch = 25.4 mm)
Connector specifications
- Voltage rating: 300 V DC/AC rms
- 2, 3 and 4 contacts current rating: 10 A per contact (max 20 A per connector)
- Insulation resistance: > 200 MΩ
- Contact resistance: < 0.01 Ω
- Wet matings: > 500
- Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
- Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
- Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
- Qualified pressure tested: 1,400 bar, 20,300 psi (mated), 800 bar, 11,600 psi (open face)
- Depth rating: PEEK 300 bar, 4,350 psi
Material specifications
- Connector body: Chloroprene rubber
- Bulkhead body with 20 mm hex flats: Brass, titanium or anodised aluminium
- Bulkhead body with 22 mm hex flats: Anodised aluminium or stainless steel
- Bulkhead body (RA): Aluminium or titanium
- 2, 3 and 4 contacts: Gold plated brass UNS - C36000
- Location pin: Stainless steel AISI 303
- O-rings: Nitrile
- Locking sleeves: ABS or stainless steel
- Snap rings: Stainless steel AISI 302
- 2, 3 and 4 contact bulkhead leads (1 ft, 30 cm): 20 AWG, 0.52 mm2 coloured PTFE
Leads colour code
1: Black
2: White
3: Red
4: Green
* 3 conductor leads colour code: 1 black, 2 white, 3 green
