Drawing information
Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)
Connector specifications
Voltage rating: 600 V DC/AC rms
Current rating: (water) 50 A per contact (max 200 A per connector)
Insulation resistance: > 200 MΩ
Contact resistance: < 0.01 Ω
Wet matings: > 500
Temperature rating (water): - 4 to 60˚C, 25 to 140˚F
Temperature rating (air): - 40 to 60˚C, - 40 to 140˚F
Storage temperature rating: - 40 to 60˚C, - 40 to 140˚F
Qualified pressure tested: 800 bar, 11,600 psi (open face)
Depth rating PEEK: 300 bar, 4,350 psi
Material specifications
Connector body: Chloroprene rubber
Bulkhead body: Brass, stainless steel, titanium or anodised aluminium
Contacts: Brass UNS - C36000
Location pin: Stainless steel AISI 303
O-rings: Nitrile
Locking sleeves: POM or stainless steel
Snap rings: Stainless steel AISI 302
Inline cable (2 ft, 60 cm): 8 AWG, 8.36 mm2 synthetic rubber
Bulkhead and PBOF leads (1 ft, 30 cm): 10 AWG, 5.26 mm2 white tagged PTFE
OM leads (3", 7 cm): 10 AWG, 5.26 mm2 white tagged PTFE
Inline cable colour code
1: Black
2: White
3: Red
4: Green
